I'm using a Flashforge Pro and attempting to print a wheel about 6mm thick to serve as a platform. In other words, the wheel doesn't have to be solid, but spokes won't do the job. I've experimented with different temperatures, but, because of ABS' thermal expansion, I don't think that will solve the problem. Also tried putting lots of 2mm holes in the wheel. I've considered other designs for the interior, but doubt that would be a solution. Has anyone tried using different print paths, i.e. actually altering the path that the slicer suggests? (grasping at straws) Thanks for your suggestions.
If you can, set your slicer to do honeycomb fill. Depending on the weight requirement choose maybe 10% - 20% fill. That ought to do the trick. It won't be solid, but it should be strong enough.
What are you going to put on the platform?