1. About
  2. Features
  3. Explore

I have just built my Anet A8 and it won't print.

I will preheat it (190°C 60°C) and then press "Print File" and select, then it starts for a second, gets to around 11% and stops and shows "Preheat PLA". The PLA is already preheated - it is coming out of the nozzle.

Any help would be appreciated.

1 Answer 1

The Anet A8 files that come preloaded are .stl so if you try to print those it will say printing zero percent and then just switch right back to preheating PLA without any error message. Download a free slicer tool if that's the case.